All new Husky 12V Ratchet H38CPRAT34PC |
Provided by the Home Depot Prospective Program for review
This
week we had the chance to work with the all new Husky 12V 3/8” ratchet, and
liked what we saw. It’s a heavy duty ratchet that really stands out in the
Husky line because of one very cool feature; it’s rechargeable.
Husky
has been turning up the heat on their main competitor Craftsman by coming out
with some really nice hand tools that ultimately have a lifetime guarantee and (no
questions asked) return policy. Though they are mostly known for socket sets,
wrenches and tool boxes, Husky is going all in with their all new 12V rechargeable
ratchet.
The
12-Volt Lithium-Ion Cordless Ratchet also comes with a 34 piece socket set, AC
charger, and a really nice hard-shell case to keep everything protected.
One of the nice things
about this ratchet is that is has a variable speed trigger which allows you to control
the speed of the motor when removing or installing a fastener. It’s super
smooth and easy to control how tight each fasteners gets.
As for built, it’s extremely
solid with a thick outside casing that will take a lot of abuse. That being
said, it is a bit heavier as it weighs 3.8 lbs, not to mention it’s a rather
big tool with a length of 10.75”. It is however built tough enough to work in
some of the toughest environments
As for power, it’s not
going to help you win any NASCAR races, but it does pack a punch. Here are the
ratings below:
1 1.Powered torque up to
30 ft./lbs.
2 2. Manual torque up to
150 ft./lbs.
3 3. Quickly install or
remove fasteners with the 230 RPM motor
As for other features,
the Husky 12V ratchet is rechargeable and takes about 1.5 hours for a full charge
using the provided A/C adaptor. We noticed that it does hold a charge well, but
you can’t replace the battery with a new one once drained. They also included a
LED battery fuel gauge on the handle to keep you informed on how much battery
life you have remaining. It also has an overload protection to prevent damage
to the tool. The one downside though is that this is a brushed tool, so keep
that in mind.
Now as weather or not
you can get this into tight spaces, well… we were surprised how well this
actually performed. The head is low-profile and can actually get into very
tight, awkward areas. The length was actually helpful when trying to get into
those tight areas, and made it much easier to reach than your standard socket wrench
would. It also has a bright built in LED light that will keep those areas
illuminated.
So
which sockets do you get with this ratchet?
Eight 1/4 in. drive
6-point sockets: SAE: 1/4 in., 9/32 in., 5/16 in., 11/32 in. MM: 8 mm, 9 mm, 10
mm, 11 mm, fourteen 3/8 in. drive 6 point sockets: SAE: 3/8 in., 7/16 in., 1/2
in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., MM: 12 mm, 13 mm, 14 mm, 15 mm, 16
mm, 17 mm, 18 mm, ten 3/8 in. drive 6-point deep sockets: SAE: 5/16 in., 3/8
in., 7/16 in., 1/2 in., 9/16 in., MM: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, one
3/8 in. drive 3 in. extension bar, one 3/8 in. F x 1/4 in. M drive adapter
At the end of the day,
we felt that though the new Husky 12V ratchet was not perfect, it would defiantly
make the job not only easier, but faster than when using a manual ratchet. The
built quality is great, and the power is enough to make just about any job a
breeze. We did wish it was brushless, and at least had a belt clip, but other
than those small items, it’s a solid, well rounded tool.
I acknowledge that The Home Depot is
partnering with me to participate in
the ProSpective 2018 Campaign. As a part of
the Program, I am receiving compensation in
the form of products and services, for the
purpose of promoting The Home Depot. All
expressed opinions and experiences are my
own words. My post complies with the Word Of
Mouth Marketing Association (WOMMA) Ethics
Code and applicable Federal Trade Commission
guidelines.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.