MILWAUKEE, WI- Milwaukee Tool continues to expand its line of cordless
solutions from frame
to finish with the introduction of their very first cordless framing
nailers, the M18 FUEL™ 21°
Framing Nailer and M18 FUEL™ 30° Framing Nailer. Delivering the power
to sink nails in
engineered lumber, these framing nailers can also fire up to 3 nails
per second with no gas
cartridges. Milwaukee® will also launch a completely redesigned compact
M18 FUEL™ 18ga
Brad Nailer with the power to consistently drive nails in soft and hard
words while leaving clean
nail holes, and with no ramp-up time.
“For years our users have demanded a Milwaukee® cordless solution to
their framing
nailer frustrations. Unwilling to settle for subpar performance, we
continued to advance our
technologies until we could provide a truly game-changing solution for
these users,” said Sean
Kelley, Product Manager for Milwaukee Tool. “This year we’re proud to
finally unveil our first
lineup of cordless framing nailers. With no gas cartridges necessary,
the power to sink nails in
the most demanding materials, and the fire rate to keep users
productive throughout their day,
these new framing nailers were worth the wait!”
With best-in-class power, the M18 FUEL™** Framing Nailers deliver a
fire rate similar to
pneumatic to keep users productive. The nailers have also been
optimized with the size
necessary to fit between studs and a balanced weight to limit fatigue.
An optional Extended
Capacity Magazine accepting two strips of nails is also available for
these tools, allowing users
to work longer before needing to reload.
With no gas cartridges, a POWERSTATE™ brushless motor, and no cleaning
required,
the nailers are designed to deliver durability and reliability to the
most demanding users with
very little maintenance. Coupled with the fact that the tools fire up
to 3 nails per second, users
will experience greatly reduced downtime and maximized productivity.
M18 FUEL™ 18ga Brad Nailer.
Milwaukee has also completely redesigned, from the ground-up, their M18
FUEL™ 18ga
Brad Nailer. The new tool delivers clean, consistent nail holes in a
compact size and with zero
ramp-up time. It has been optimized to consistently sink nails
sub-flush in all common materials
and orientations, with reduced recoil and a reduced hole size left by the
nail and striker. In
addition, the front of the tool has been streamlined to improve
line-of-sight to the work surface
and access to tight spaces, and the overall weight has been reduced for
better balance and less
fatigue.
Milwaukee is committed to improving productivity by providing
performance-driven and
trade-focused solutions so users can perform an entire day’s work on
one battery system. The
new M18 FUEL™ Framing Nailers and M18 FUEL™ 18ga Brad Nailer are fully
compatible with
the entire M18™ line, and are a true testament to Milwaukee’s focus on
investing in gamechanging technology that truly delivers breakthrough solutions
for users.
*Depending on the application.
** M18 FUEL™ is engineered for the most demanding tradesmen in the
world. Delivering
unrivaled performance, all M18 FUEL™ products feature three
Milwaukee®-exclusive
innovations—The POWERSTATE™ Brushless Motor, REDLITHIUM™ Battery Pack
and
REDLINK PLUS™ Intelligence Hardware and Software—that deliver unmatched
power, runtime and durability on the jobsite. Simply put, M18 FUEL™ tools are
the most powerful 18V
cordless tools in their class.
Finish Nailer Specifications
M18 FUEL™ 18GA Brad Nailer (2746-21CT) – NEW!
• Nail Sizes: 5/8” – 2-1/8”
• Magazine Capacity: 110 nails
• 1500 nails per charge on a REDLITHIUM 2.0 Compact Battery
• Sequential and Contact Actuation Modes
• Dry-Fire Lockout, Adjustable Belt Hook & LED Work Light
Includes M18 FUEL™ 18GA Brad Nailer, (1) M18™ REDLITHIUM™ 2.0 Compact
Battery
Packs, Charger and Contractor Bag.
*Also available as bare tool (2746-20)
• Nail Sizes: 3/4” – 2-1/2”
• Magazine Capacity: 110 nails
• 800 nails per charge on a REDLITHIUM 2.0 Compact Battery
• Sequential and Contact Actuation Modes
• Dry-Fire Lockout, Adjustable Belt Hook & LED Work Light
Includes M18 FUEL™ 16GA Finish Nailer, (1) M18™ REDLITHIUM™ 2.0 Compact
Battery
Packs, Charger and Carrying Case
*Also available as bare tool (2741-20)
M18 FUEL™ 16 GA Angled Nail Finish Nailer (2742-21CT)
• Nail Sizes: 1-1/4” – 2-1/2”
• Magazine Capacity: 110 nails
• 800 nails per charge on a REDLITHIUM 2.0 Compact Battery
• Sequential and Contact Actuation Modes
• Dry-Fire Lockout, Adjustable Belt Hook & LED Work Light
Includes M18 FUEL™ 16GA Finish Nailer, (1) M18™ REDLITHIUM™ 2.0 Compact
Battery
Packs, Charger and Carrying Case
*Also available as bare tool (2742-20)
M18 FUEL™ 15 GA Angled Nail Finish Nailer (2743-21CT)
• Nail Sizes: 1-1/4” – 2-1/2”
• Magazine Capacity: 110 nails
• 700 nails per charge on a REDLITHIUM 2.0 Compact Battery
• Sequential and Contact Actuation Modes
• Dry-Fire Lockout, Adjustable Belt Hook & LED Work Light
Includes M18 FUEL™ 15GA Finish Nailer, (1) M18™ REDLITHIUM™ 2.0 Compact
Battery
Packs, Charger and Carrying Case
*Also available as bare tool (2743-20)
Framing Nailer Specifications
M18 FUEL™ 21° Framing Nailer (2744-21) – NEW!
• Nail Sizes: 2” – 3-1/2”
• Nail Diameter: 0.113” – 0.148”
• Magazine Capacity: 45 nails
• 700 nails per charge on a REDLITHIUM XC5.0 Battery
• Sequential and Contact Actuation Modes
• Dry-Fire Lockout, Belt Hook, Rafter Hook, & LED Work Light
Includes M18 FUEL™ 21° Framing Nailer, (1) M18™ REDLITHIUM™ XC5.0
Battery Pack,
Charger and Carrying Case
*Also available as bare tool (2744-20)
M18 FUEL 21° Framing Nailer Extended Magazine (48-08-2744) – NEW!
• Magazine Capacity: 83 nails
• Nail Sizes: 2” – 3-1/2”
• Nail Diameter: 0.113” – 0.148”
M18 FUEL™ 30° Framing Nailer (2745-21) – NEW!
• Nail Sizes: 2” – 3-1/2”
• Nail Diameter: 0.113” – 0.131”
• Magazine Capacity: 110 nails
• 700 nails per charge on a REDLITHIUM XC5.0 Battery
• Sequential and Contact Actuation Modes
• Dry-Fire Lockout, Belt Hook, Rafter Hook, & LED Work Light
Includes M18 FUEL™ 30° Framing Nailer, (1) M18™ REDLITHIUM™ 2.0 Compact
Battery
Packs, Charger and Carrying Case.
*Also available as bare tool (2745-20)
M18 FUEL 30° Framing Nailer Extended Magazine (48-08-2745) – NEW!
• Magazine Capacity: 105 nails
• Nail Sizes: 2” – 3-1/2”
• Nail Diameter: 0.113” – 0.131”
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.