Monday, April 22, 2024

Dewalt releases two new framing nailers, but something seems very familiar about them

New DEWALT 20V MAX* XR® 21º Plastic Collated Framing Nailer and 30º Paper Collated Framing Nailer Help Minimize Downtime Between Shots with an Innovative Flywheel Install up to 530 sqft. of subflooring per charge** and complete up to 100 ft. of wall framing per charge† with DEWALT’s next-generation framing nailers

TOWSON, MD Apr 22, 2024 – DEWALT, a Stanley Black & Decker (NYSE: SWK) brand and leader in total jobsite solutions, today announced the new 20V MAX* XR® Brushless Cordless 21º Plastic Collated Framing Nailer (DCN920) and 30º Paper Collated Framing Nailer (DCN930) each delivering powerful performance in a wide range of applications. Designed with an innovative flywheel, the nailers help minimize downtime between shots by allowing the tool to stay active after the trigger is released.

“Productivity is vital on the jobsite and the new DEWALT nailers will keep pros working at optimal efficiency with the new flywheel that eliminates ramp-up time between shots in rapid sequential mode,” said Tyler Knight, Senior Product Manager Stanley Black & Decker. “The nailers are lightweight at just 8.65 lbs. each (tool only) and provide the convenience and mobility of cordless without the hassles of compressor and hose hook-up that extend setup and breakdown time.”

The nailers allow pros to install up to 530 sqft. of subflooring** and complete up to 100 ft. of wall framing per charge† for enhanced productivity. Each model also drives nails up to 72% more sub-flush than previous nailer model††.

The next-gen nailers are compatible with newly introduced optional extended magazines, DZN920 and DZN930 (sold separately), that are constructed from high-strength magnesium and hold two strips of nails. Users can align and drive up to 3-1/2 in. nails at aggressive angles with the redesigned nose that is engineered for “toe-nailing” applications. With field serviceable springs and a driver blade, the nailers also require less delay-inducing maintenance.

The DEWALT 20V MAX* XR® 21º Plastic Collated Framing Nailer and 30º Paper Collated Framing Nailer as well as extended magazines will be available in April where DEWALT products are sold.

To learn more about the DEWALT products, please visit: www.dewalt.com.

*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. **32 nails per 3/4 in. OSB subfloor 4 ft. x 8 ft. panel, using DCB205 5Ah battery (sold separately). †7 nails per SPF wall stud, using DCB205 5Ah battery (sold separately). †† vs. DCN21PL and DCN692, 3.25 in. smooth shank nail into laminated veneer lumber, using DCB205 5Ah battery (sold separately).

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

Milwaukee Tool Announces all new M12 Compact Brad Nailer in 2024

MILWAUKEE, WI – Milwaukee Tool delivers peak productivity and access to tight spaces on the jobsite with the compact, lightweight design of...